This Varitronics (FujiFilm) ProImage Plus Thermal Poster Printer Machine is in good working and physical condition with scratches and scuffing from normal use.
It was tested with the following notes from our testing technician:
- it was powered on, pass the self test check (no error Led).
- the Buttons are responsive / the LEDs are Bright.
- the Display in general is in good condition the first 2 characters have reduced contrast(see photos).
- during the test after each power on the print quality is bad, after the warm up the print quality get better as pictured. (check the photos and the video)
- the scanner work perfectly, the pass through system is intact.
- the cutter blade is attached.
- Check the Video For an Idea about the working condition (note: only the parts in the includes section are part of this sale )
Features & Specs:
- Type: desktop type printer
- Scanning system: fixed contact image sensor
- Scanning resolution: 400 dpi
- Input size: letter size, banner (8 1/2″ wide)
- Input format: sheet paper, thickness 50 – 350 microns
- Printing system: thermal printing
- Printing modes: normal, photo, reverse
Printing resolution: 300 dpi - Paper size: A1(23″), A2(17″) wide paper rolls
- Paper types: FUJI FILM Poster Printer paper, Direct Thermal Paper (DTP)
- Output sizes: 14″x22″, 17″x22″, 23″x31″ (33″x44″ and 45″x59″ are printed in two pieces)
- Paper supply: continuous feed roll paper
- Paper cutting: bidirectional manual cutter
- Print size and printing speed: 17″x22″ enlargement approx.1.7 (DTP 1min 00sec) Check manual of others
- Warm-up time: approx. 8 seconds
- Noise level: approx. 53 dB (A)
- Dimensions/weight: approx. 28.1 (W) x 12.4(D) x 8.5 (H) inches; approx. 31 lb.
- Power supply: AC120V ±10% ; 50/60 Hz
- Power consumption: at standby: approx. 15W; printing: approx. 210W
- Operating environment: temperature: 50° – 86 °F; relative humidity: 20 – 80% RH
Note: These item is from a local government Auction.
Includes:
- 1x Varitronics (FujiFilm) ProImage Plus Direct Thermal Wide Paper Poster Printer
- 2x End caps
- 1x Paper Roll (For after receiving testing purpose)
- 1x Cutter (Attached)
- 1x Standard Power Cable
- 1x Printed Samples
Does Not Include:
- Optional accessory and Supplies(Extra: platen rubber, thermal heads, cutter unit or cutter base)
- Software CD/DVD, User Guide
- Anything else not listed or pictured above
